Hooking Up Car Subwoofer
Sub Woofer For Car
Car Subwoofer Problems
Infinity Kappa Perfect10vq Car Subwoofer Driver
Comparesubwoofer Car Subwoofers Prices
Car Subwoofer Buying Guide
Subwoofer For A Car
Kicker Solox Subwoofer Car Speaker
Car Subwoofer
Home Theater System
car subwoofer boxes
I haven't used it personally but it's fairly popular and free. If you do not want to modify your existing speaker holes, shop for speakers that will fit in the current space available. The crossover fits nicely in between the door panel and the door frame, so just it in. Completing the Installation. You probably do unless you have a multi-megawatt system or an extremely tiny alternator which is unlikely.
car audio distributor
Some vehicles will require additional steps, but this will at least give you a good starting point. When you want to join the pieces of your enclosure together, your best bet when doing this is to use screws. Another good material to use for your enclosures is fiberglass. That just isnt true.
This is pretty straight forward so I figured that I would get straight to the point on how to deal with this.
1. Remove the radio so that you can access the connections on the back.
2. Connect the audio cable to the line-out wires that are located on the back of the radio. Connect the red plug on the RCA cable into the red plug (left) on the radio and the black plug (right) on the RCA cable to the black plug on the radio.
3. Connect the 18 gauge wire that is usually provided in the amplifier power kit to the amplifier turn-on wire on the radio. It should be a blue wire on an aftermarket radio. Make sure that you are not connecting the remote turn-on wire to the power antenna wire because it may also be blue. Solder or crimp the connection and then wrap it with electrical tape to protect the connection.
4. Run the audio cable and amplifier turn-on wire that is located behind the dash and kick panel and down the side of the vehicle behind the doorsills to the amplifier. You should tape or wire-tie the remote turn-on wire to the audio cable so that it is easier to run through the vehicle. Run the audio cables down the opposite side of the car from the power wire to ensure that engine noise or other electrical noises do not cross over into the audio cables.