Woofer Amps
Cheap Car Subwoofer
Install Sub Woofer
Audio Car Panasonic
Infinity Car Subwoofer
How To Hook Up A Subwoofer In A Car
Car Subwoofer
Home Theater System
12 subwoofers
Of course, with the need for music, we also have a need to experience it in better ways. If you want to make things even less obvious you can always purchase interior paint from an auto shop and paint your grill to match the color of your interior panels. 5" SIDES 2 19. Use the included wire ties to gather excess cable and routed the speaker wires around the window crank.
car audio subwoofer
If you will be powering the speakers that are already in the vehicle, it's usually easier to run the speaker wire from the back of the radio when you are connecting the audio and remote turn-on cables. As for the thickness of the wood, 5/8-inch will suffice for enclosures with internal volumes of 2 cubic feet or less; for larger boxes, you will want to use 3/4-inch material. If its at all possible, run it through an existing grommet on the firewall. You probably do unless you have a multi-megawatt system or an extremely tiny alternator which is unlikely. The next section is going to explain the different subwoofer boxes in detail so that you will know which ones you want.
Every car is different, so things may vary. However as the method is the same, here are a few general tips to keep in mind as you plan your speaker installation.
Replacing dash speakers
Most dash speakers are easily replaced by removing the grilles, which are held down by screws or friction fittings. If the grille is held in place by friction fittings, carefully pry it up. In some cases the grille is secured from the bottom by screws, or by plastic studs which can break with excessive force. In such cases, the entire dash panel may need to be removed.
Remove the old speakers, making sure to note the polarity of each terminal. The speaker's positive terminal is the bigger one and usually is marked with a + sign or a colored dot. Use your wiring harness to attach the new speaker, or solder or crimp the connections.
Replacing door speakers
In many cars, door speakers are the easiest to replace. Newer have notched a slot into the edge of the grille. All you have to do is take a screwdriver, pop out the grille, and dismount the factory speaker to get it out.
Step 1.
Remove the grille and factory speaker. Some manufacturers also use a sealant or foam when they first mount the speaker so you might need to cut through that material with a utility knife.
Step 2.
Unplug the factory wiring harness, and attach the Crutchfield wiring harness to your new speaker's terminals. With the wiring harness connected to your new speaker, just plug the other end of the harness into the factory wiring harness.
Step 3.
Check one last time to be sure that all of your wiring is secure, and then screw the new speaker into place in the factory mounting and re-attach the factory grille.