Kicker Woofer
Top Car Subwoofer
Chinese 10 Inch Car Sub Woofers
Alpine Car Audio System
Car Subwoofer
Home Theater System
car subwoofer system
Like any other component in a car stereo system the ultimate goal of the speaker is to pump up the sound without adding any changes of the original sound to the audio signal. This is particularly true if you are driving an older model car. Fiberglass can be shaped to fit any contour or curve as well, so it works great when it comes to putting it onto your car. 5" JL Audio 10W1 - 3. Basics of Speakers How can you really look to build a subwoofer if you dont have at least a basic idea of how speakers work etc?
car subwoofer home
This is also useful for most car trunks. We want better than the boom box to carry this awesome sound. It lets you hear what different frequencies sound like.
Every car is different, so things may vary. However as the method is the same, here are a few general tips to keep in mind as you plan your speaker installation.
Replacing dash speakers
Most dash speakers are easily replaced by removing the grilles, which are held down by screws or friction fittings. If the grille is held in place by friction fittings, carefully pry it up. In some cases the grille is secured from the bottom by screws, or by plastic studs which can break with excessive force. In such cases, the entire dash panel may need to be removed.
Remove the old speakers, making sure to note the polarity of each terminal. The speaker's positive terminal is the bigger one and usually is marked with a + sign or a colored dot. Use your wiring harness to attach the new speaker, or solder or crimp the connections.
Replacing door speakers
In many cars, door speakers are the easiest to replace. Newer have notched a slot into the edge of the grille. All you have to do is take a screwdriver, pop out the grille, and dismount the factory speaker to get it out.
Step 1.
Remove the grille and factory speaker. Some manufacturers also use a sealant or foam when they first mount the speaker so you might need to cut through that material with a utility knife.
Step 2.
Unplug the factory wiring harness, and attach the Crutchfield wiring harness to your new speaker's terminals. With the wiring harness connected to your new speaker, just plug the other end of the harness into the factory wiring harness.
Step 3.
Check one last time to be sure that all of your wiring is secure, and then screw the new speaker into place in the factory mounting and re-attach the factory grille.