Buy Subwoofer Car Subwoofers
Audio Subwoofer
Sony Xs L1090p5 Car Subwoofer Driver
Subwoofer Component
Automobile Subwoofers
6x9 Sub Woofer
Loudest Car Subwoofer
Car Subwoofer
Home Theater System
shopping for car subwoofers
You can often hear the bumpin sounds of the latest hip hop and club tunes blasting from random cars, and you realize that you would love to have those sounds in your own car. Use the included wire ties to gather excess cable and routed the speaker wires around the window crank. All you have to do is take a screwdriver, pop out the grille, and dismount the factory speaker to get it out.
best car audio subwoofer
Parts needed Amplifier Power Kit For installing an amp, you will need this kit because it contains the wiring that you need to run power wires from the amplifier to the battery. What if I'm using more than one driver? We trimmed the cutout with an exacto blade. Car Audio Basics When you are trying to build a subwoofer box of your own so that your car is the best sound quality that you could possibly find, it helps to really understand the basics of car audio.
You will need to remove your old radio from the dash so that you can connect the audio cable from your radio to the amplifier. You will have to make sure that your radio has audio outputs, which are also called RCA outs or preamp outputs, so that you can plug your audio cables into them.
If your radio does not have audio outputs of its own, you will need to purchase an amplifier that can accept a speaker-level input or you will have to get a converter that will convert a speaker-level signal to an audio cable signal. An amplifier turn on wire will also have to be connected behind the radio.
Here are the steps needed to remove the stereo:
1. Figure out how the current radio is secured into the dash. In most cases, this will mean taking it apart and removing certain parts of the dashboard or trim. Gather the appropriate tools and lighting if you need it. Place a drop cloth over any dash, console or front seats that you want to protect from debris.
2. Remove any screws that are holding the dashboard or trim pieces in place. Carefully search for screws that hold the dash piece. Be sure to check inside ashtrays, glove boxes for any of the hidden screws. In some cases, the dash piece is held in place with clips that are attached to its back. These clips will need to be removed with a panel tool. Before pulling out the dash panel though, you have to make sure that all screws and clips have been removed.
3. Once the dash or trim pieces are removed, the radio should be easy to see. Typically there are brackets or flanges holding in it the dash. Remove the screws or bolts holding the brackets and flanges.
4. Carefully slide the radio out only far enough so you can reach the wiring on the back. Depending on the space that you have available, you may be able to connect the audio cables without having to unplug the harnesses and take out the radio. Most of the time, you will need to remove the radio from the dash in order to plug in the audio cables and route them behind the dash.