15 Car Subwoofer
6 Car Subwoofer
Competition Sub Woofers
Subwoofer For Car Audio
Car Subwoofer
Home Theater System
bose car speakers
33 ohms. Speaker wire connection Here is where you learn how to connect the speaker wires. Before you run the wires through, you will have to double-check that you can reach the area of the firewall where the wires will enter the inside of the car. This could damage your car.
15 car subwoofer
Your headlights will dim to the beat. htmWinISD recommends a 1. There are quite a few different enclosure design software programs out there that can really make making your subwoofer box easier. 5" JL Audio 10W1 - 3. Make sure that you are not connecting the remote turn-on wire to the power antenna wire because it may also be blue. It should be a blue wire on an aftermarket radio.
This is pretty straight forward so I figured that I would get straight to the point on how to deal with this.
1. Remove the radio so that you can access the connections on the back.
2. Connect the audio cable to the line-out wires that are located on the back of the radio. Connect the red plug on the RCA cable into the red plug (left) on the radio and the black plug (right) on the RCA cable to the black plug on the radio.
3. Connect the 18 gauge wire that is usually provided in the amplifier power kit to the amplifier turn-on wire on the radio. It should be a blue wire on an aftermarket radio. Make sure that you are not connecting the remote turn-on wire to the power antenna wire because it may also be blue. Solder or crimp the connection and then wrap it with electrical tape to protect the connection.
4. Run the audio cable and amplifier turn-on wire that is located behind the dash and kick panel and down the side of the vehicle behind the doorsills to the amplifier. You should tape or wire-tie the remote turn-on wire to the audio cable so that it is easier to run through the vehicle. Run the audio cables down the opposite side of the car from the power wire to ensure that engine noise or other electrical noises do not cross over into the audio cables.