Car Subwoofer Systems
Speakers And Subwoofers Prices
Jbl Car Subwoofer
Car Subwoofer Buying Guide
Car Subwoofer
Home Theater System
car speakers and subwoofers prices
Take out all the hardware from the box your speakers came in. Before you run the wires through, you will have to double-check that you can reach the area of the firewall where the wires will enter the inside of the car. The stuffing can make the box appear up to 40% larger to the driver. This will be a simple rectangular box. Once you've located those speaker leads, you may want to mark them with tape so that you know which ones they are. Gather the appropriate tools and lighting if you need it.
custom sub woofer box
It even prints out the cut sheets for your car subwoofer box plans so that you dont have to. 2 cubic foot box with a 24 Hz tuning frequency for our vented enclosure. Thanks to the ultimate rise of club music, people all over the place are desperate to create a club atmosphere everywhere they go.
This is pretty straight forward so I figured that I would get straight to the point on how to deal with this.
1. Remove the radio so that you can access the connections on the back.
2. Connect the audio cable to the line-out wires that are located on the back of the radio. Connect the red plug on the RCA cable into the red plug (left) on the radio and the black plug (right) on the RCA cable to the black plug on the radio.
3. Connect the 18 gauge wire that is usually provided in the amplifier power kit to the amplifier turn-on wire on the radio. It should be a blue wire on an aftermarket radio. Make sure that you are not connecting the remote turn-on wire to the power antenna wire because it may also be blue. Solder or crimp the connection and then wrap it with electrical tape to protect the connection.
4. Run the audio cable and amplifier turn-on wire that is located behind the dash and kick panel and down the side of the vehicle behind the doorsills to the amplifier. You should tape or wire-tie the remote turn-on wire to the audio cable so that it is easier to run through the vehicle. Run the audio cables down the opposite side of the car from the power wire to ensure that engine noise or other electrical noises do not cross over into the audio cables.