Town Car Subwoofer
Sony 3 Way Car Speaker
Car Speakers And Subwoofers Consumer Reviews
Competition Sub Woofers
10 Inch Car Subwoofer
Car Subwoofer
Home Theater System
car subwoofer amplifier
Disconnect the positive terminal from the battery. The manufacturer stereo hookups are getting better and offer decent quality sounds, but if you really want the bass to bump, you need a system in the trunk that is far better than what comes with your car. Gather the appropriate tools and lighting if you need it. Fiberglass has also been around in the subwoofer world for a long time, and it's used to build everything from boats to Cars, and all the way down to the seats on the rides at Magic Mountain. For example, if your driver's Vas is 3 cu.
audio car panasonic
Take out all the hardware from the box your speakers came in. VOILA! Of course, with the need for music, we also have a need to experience it in better ways. Taking the Door apart.
Please note that these were located at http://www.caraudiohelp.com/plans_for_subwoofer_enclosures/plans_for_subwoofer_enclosures_sealed.htm
Plan #1 - Sealed Subwoofer Enclosure
WinISD recommends a 1.55 cubic foot box for our sealed enclosure. We'll achieve this by using 3/4 " MDF for the enclosure with external dimensions of 15.5" x 24 " x 10 ". This will be a simple rectangular box. Modeling the enclosure we see that it has a 87 dB sensitivity and a -3dB (half power) frequency of 42 Hz. This box should give very strong output when it is combined with the 12dB/octave boost provided by most automobiles.
JL Audio 10W1
SPL (1W/1m) - 87 dB
-3dB @ 42 Hz
Here is the layout of our subwoofer enclosure. We will need to cut the following pieces:
SIDE QUANTITY DIMENSION
TOP/BOTTOM 2 24" x 10"
FRONT/BACK 2 24" x 15.5"
SIDES 2 15.5" x 10"
JL Audio 10W1 - 1.55 cubic ft
Plan #2 - Vented Subwoofer Enclosure
WinISD recommends a 3.2 cubic foot box with a 24 Hz tuning frequency for our vented enclosure. Using a four inch port we'll need a vent that is fifteen inches long. We must take this volume into account. The volume of a cylinder is pi*r2*h, or (3.14)*(2)2*15 = 188 cubic inches. Divide this by 1,728 to get cubic feet and we add 0.11 cubic feet to the enclosure.
We'll achieve this by using 3/4 " MDF for the enclosure with external dimensions of 19.5" x 30" x 12.5". This will be a simple rectangular box. Modeling the enclosure we see that it has a 87 dB sensitivity and a -3dB (half power) frequency of 24 Hz (the tuning frequency). This box should give incredible amounts of output when it is combined with the 12dB/octave boost provided by most automobiles. This is to be expected with a box this large. In practice we would probably make the enclosure half this size, or similar to the size of the sealed enclosure.
JL Audio 10W1
SPL (1W/1m) - 87 dB
-3dB @ 24 Hz
Here is the layout of our subwoofer enclosure. We will need to cut the following pieces:
SIDE QUANTITY DIMENSION
TOP/BOTTOM 2 30.5" x 12.5"
FRONT/BACK 2 30.5" x 19.5"
SIDES 2 19.5" x 12.5"
JL Audio 10W1 - 3.3 cubic ft